Why is your ultra-fine mill efficiency lower than others?2019-09-02 11:10:27

Summary:Ultra-fine grinding machine has a wide range of applications in the grinding of mineral materials in the fields of metallurgy, building materials, chemicals and mining. According to the fineness of the milled plastic and the fineness of the material to be.

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Get Price Staff Service

Why is your ultra-fine mill efficiency lower than others?

Ultra-fine grinding machine has a wide range of applications in the grinding of mineral materials in the fields of metallurgy, building materials, chemicals and mining. According to the fineness of the milled plastic and the fineness of the material to be discharged, the ultrafine mill can be divided into many types, such as Raymond mill, ultrafine mill, trapezoidal mill and so on. The production efficiency of the ultra-fine mill directly affects the profit of the manufacturer. For the factors affecting the production efficiency of the ultra-fine mill, it is necessary to pay more attention to the production. Xiaobian will discuss with you all the factors affecting the production efficiency of ultrafine mills.

Material hardness is an important factor affecting the production efficiency of ultra-fine mills. The harder the material, the harder it is to process and the more severe the wear on the equipment. When the hardness of the material is high, the ultra-fine mill has a slow grinding speed, a small grinding ability and a low production efficiency. Therefore, in the daily use of equipment, the hardness of the material should be ground in strict accordance with the instructions of the ultra-fine mill.

Each type of grinding equipment has different requirements for the moisture content of the material, but regardless of the type of equipment, the production efficiency will be affected to a large extent by the water content. When the moisture content of the material is high, the material is easy to adhere in the ultrafine mill, and is also easily blocked during the feeding process, resulting in a reduction in the milling capacity of the ultrafine mill and a decrease in production efficiency. At the same time, it will block the circulation air duct, the discharge port of the analysis machine, etc., so it is necessary to control the water content of the material. Generally, the moisture content of the material can be controlled by the drying operation before production.

The fine powder contained in the material also affects the production efficiency of the ultrafine mill. Because these fine powders are easy to adhere, affecting the transport. When the material contains more fine powder, it tends to adhere to the equipment during the grinding process, affecting the transportation. For such materials containing more fine powder, the sieve should be sieved one time in advance.

The higher the particle size requirement of the finished product of the material, the smaller the grinding ability of the ultra-fine mill. Because the material needs to be ground in the ultra-fine mill for a longer period of time, the finished product produced in the same time is relatively less and the production efficiency is reduced. If you have high requirements on the material's discharge size, you can add other equipment according to your own production capacity and economic strength to ensure production efficiency.

In addition to the external factors introduced above, there are also some internal factors that affect the production efficiency of ultra-fine mills, such as improper operator operation and insufficient lubrication of equipment. In actual production, these problems should be circumvented in time according to the actual situation, so as to improve the production efficiency of the equipment and ensure the economic efficiency of the enterprise.

Request a Quotation

HOT PRODUCTS